still black screens

[beaker1970]

Hello,

I purchased VIP Astra, but still have black screens.

So far i did this:
- copied server subscription lines to CCcam.cfg
- disabled EMM
- restarted the softcam
- restarted the dreambox (VU+SOLO2)
- checked the connection history: 14 connections today

please help me.

[suma]

Hi,
Read https://www.cardsharing.cc/index.php?board=60.0

[beaker1970]

I followed this:
https://www.cardsharing.cc/index.php?topic=33652.0

still black screens ....I am sure all settings are like in the thread above. Mgcamd is active. I rebooted emulator and box, no result.

p.s. I have now warnings about serious violations ? So connecting to the server works fine., decoding does not.

[suma]

1. Yesterday, I saw Cccam emulator in your signature (both Cccam emulator and Cccam protocol). Today, I see mgcamd emulator. You did not mention emulator version. We recommend using Mgcamd 1.35(a).
2. OK, if you changed emulator from Cccam to Mgcamd, are you using our recommended config-files? https://www.cardsharing.cc/index.php?topic=28088.0
3. Before using Mgcamd, be sure that proper {B} value for your receiver is installed. For this, read sub-forum re: Hardware (receivers), find your model, firmware used by other users, etc.
4. After you purchased subscription, you start reading forum. Have you ever taken a free test or 3-day paid test to adjust your receiver? I think, NO. Now, you are trying to fish out answers to all your questions one by one: I did that, but I failed. I did this, but I failed again. Don't you think that this is not correct? Or, you think that "support" will help you? Read the forum and learn how to adjust equipment, you may also freeze your subscription, take a test and adjust your receiver until the package you subscribed is decoded.

[beaker1970]

I would expect a product to be easy installable, I did a test with another cardsharer and it worked within 2 minutes, but the package was not what I wanted, yours is.

I checked out the forum with the links you provided, I would appreciate you give me the final push to get this working. It should not be so difficult. I am a noob on sat receivers but not with computers.

B=06, G=32, i changed that, removed cccam and mgcamd from my receiver to start fresh. Installed cccam 2.3.0 and mgcamd 1.35a. Suspended my package and took a test line: added C: xx.xx.xx.xx 40044 5834615 8877771 to cccamd.list and cccam.cfg, restarted the softcam, still black. Rebooted the receiver, still black.

there is nothing more I can do I guess ? I am pissed at this, as you probably also are on me asking it how to get it to work...

[suma]

1. VIP Astra includes: 19E Sky Deutschland(HD), HD Plus (Deutschland), ORF, Canaal Digitaal, TV Vlaanderen, MTV + Technisat, D+ Spain, Hustler TV,VIVID TV, Dorcel TV
As for Canaal Digitaal, D+ Spain and TV Vlaanderen - they are not 100% guaranteed, come as a free bonus and not available most of the time.
2. Start from the beginning: reflash your receiver with an image which is the best for it. For this, read users signatures in the Hardware section and understand which image (firmware) you need to install https://www.cardsharing.cc/index.php?board=53.0
I see that most of the users have BlackHole installed. Never use factory installed firmware, it cannot be used for CS.
3. Install MgCamd 1.35 and all recommended configs. When you open ignore.list or priority list in Total Commander or similar, you will see that initially they are empty. They are used to ignore or prioritise CAIDs used by some satellite providers in some packages.
4. If you are interested in Sky Deutschland (HD), read what is needed to do
https://www.cardsharing.cc/index.php?topic=24539.0
https://www.cardsharing.cc/index.php?topic=33211.0
General info: https://www.cardsharing.cc/index.php?board=78.0
5. The same with HD Plus https://www.cardsharing.cc/index.php?board=73.0
When you put all CAIDs required to open German channels, run your receiver with MgCamd emulator (Newcamd protocol).
Take a free test (just for 1 channel) and be sure that it is running OK. You may take a free test as many times as you like. No limits.
Keep your eye on your billing statistics (history). If everything is OK, then use full subscription.
If you don't like something, you may switch to Cccam with Newcamd https://www.cardsharing.cc/index.php?topic=33652.0 and try again.
Read more posts re:settings especially by our oldest user Jogi https://www.cardsharing.cc/index.php?action=profile;area=showposts;u=41468
From his posts, select the info you need and use it.

[Jogi]

Installed cccam 2.3.0 and mgcamd 1.35a.

thats for sure a problem !
only ONE emulator can run at one time - CCcam OR Mgcamd but not both together
Mgcamd need to be used for Newcamd protocol. Mgcamd is capable to use CCcam protocol but for receivers where an original CCcam-client is available I would suggest to use this (2.3.0 is the latest as far as I know). Personally I would prefer Mgcamd (especially latest CCcam-client is known to contact home server for unknown reasons) and Newcamd protocol but at the end both will work

there is nothing more I can do I guess ? I am pissed at this

always funny that people get pissed off because they are not able to get there own hard and software working
if "not a noob at computers" stand for more than to be able to click precisely on buttons, you should be aware that there a many FAQ and help forums available on the net - thats the same for STBs = start looking at support forums for your device !

[Lokorokobot]

My screen is black since yesterday. I got the same subscriptions. Have anyone else the prob?

[Lokorokobot]

Sorry... Hello at first

[xtruex]

My screen is black since yesterday. I got the same subscriptions. Have anyone else the prob?

What is your receiver ?
What is your subscription ?
Where log file ?

[Lokorokobot]

Hello, i have a AX Odin . my subscription is the VIP German with cccam log file.

[suma]

Read thisthread from the very beginning, maybe this will help you. You are ignoring everything and even did not move your finger to understand what is CS. You may also start reading from FAQ